I. ENGINE REPAIR   Date and page of activity
D. Lubrication and Cooling Systems Diagnosis and Repair  
10 Inspect, and test fans(s) (electrical or mechanical), fan clutch, fan shroud, and air dams. P-2  
12 Inspect, test, and replace oil temperature and pressure switches and sensors.  P-2  
V. BRAKES  
E. Miscellaneous (Wheel Bearings, Parking Brakes, Electrical, Etc.) Diagnosis and Repair  
5 Check operation of parking brake indicator light system.  P-3  
6 Check operation of brake stop light system; adjust and service as needed.  P-1  
VI. ELECTRICAL/ELECTRONIC SYSTEMS  
A. General Electrical System Diagnosis  
1 Use wiring diagrams during diagnosis of electrical circuit problems.  P-1  
2 Check electrical circuits with a test light; determine necessary action.  P-2  
3 Check voltage and voltage drop in electrical/electronic circuits using a digital multimeter (DMM); determine necessary action. P-1  
4 Check current flow in electrical/electronic circuits and components using an ammeter; determine necessary action. P-1  
5 Check continuity and resistances in electrical/electronic circuits and components with an ohmmeter; determine necessary action. P-1  
6 Check electrical circuits using jumper wires; determine necessary action.  P-2  
7 Locate shorts, grounds, opens, and resistance problems in electrical/electronic circuits; determine necessary action. P-1  
8 Measure and diagnose the cause(s) of abnormal key-off battery drain; determine necessary action. P-1  
9 Inspect and test fusible links, circuit breakers, and fuses; determine necessary action. P-1  
10 Inspect and test switches, connectors, relays, and wires of electrical/electronic circuits; perform necessary action. P-1  
VI. ELECTRICAL/ELECTRONIC SYSTEMS  
D. Charging System Diagnosis and Repair  
1 Perform charging system output test; determine necessary action.  P-1  
2 Diagnose charging system for the cause of undercharge, no-charge, and overcharge conditions. P-1  
3 Inspect and adjust generator (alternator) drive belts; replace as needed.  P-1  
4 Inspect and test voltage regulator/regulating circuit; perform necessary action.  P-2  
5 Remove, inspect, and install generator (alternator).  P-2  
6 Disassemble generator (alternator), clean, inspect, and test components; determine necessary action. P-3  
7 Perform charging circuit voltage drop tests; determine necessary action.  P-1  
VI. ELECTRICAL/ELECTRONIC SYSTEMS  
E. Lighting Systems Diagnosis and Repair  
1 Diagnose the cause of brighter than normal, intermittent, dim, or no light operation; determine necessary action. P-2  
2 Inspect, replace, and aim headlights and bulbs.  P-2  
3 Inspect and diagnose incorrect turn signal or hazard light operation; perform necessary action P-2  
VI. ELECTRICAL/ELECTRONIC SYSTEMS  
F. Gauges, Warning Devices, and Driver Information Systems  
Diagnosis and Repair  
1 Inspect and test gauges and gauge sending units for cause of intermittent, high, low, or no gauge readings; determine necessary action. P-2  
2 Inspect and test connectors, wires, and printed circuit boards of gauge circuits; determine necessary action. P-3  
3 Diagnose the cause of incorrect operation of warning devices and other driver information systems; determine necessary action. P-1  
4 Inspect and test sensors, connectors, and wires of electronic instrument circuits; determine necessary action. P-3  
VI. ELECTRICAL/ELECTRONIC SYSTEMS  
G. Horn and Wiper/Washer Diagnosis and Repair  
1 Diagnose incorrect horn operation; perform necessary action.  P-3  
2 Diagnose incorrect wiper operation; diagnose wiper speed control and park problems; perform necessary action. P-3  
3 Diagnose incorrect windshield washer operation; perform necessary action.  P-3  
VI. ELECTRICAL/ELECTRONIC SYSTEMS    
H. Accessories Diagnosis and Repair  
1 Diagnose incorrect operation of motor-driven accessory circuits; determine necessary action. P-2  
2 Diagnose incorrect heated glass operation; determine necessary action.  P-3  
3 Diagnose incorrect electric lock operation; determine necessary action.  P-3  
4 Diagnose incorrect operation of cruise control systems; repair as needed.  P-3  
5 Diagnose supplemental restraint system (SRS) concerns; determine necessary action. (Note: Follow manufacturer’s safety procedures to prevent accidental deployment.) P-2  
6 Diagnose radio static and weak, intermittent, or no radio reception; determine necessary action. P-3  
VIII. ENGINE PERFORMANCE    
B. Computerized Engine Controls Diagnosis and Repair  
5 Inspect and test computerized engine control system sensors, powertrain control module (PCM), actuators, and circuits; perform necessary action. P-2  
9 Inspect and test power and ground circuits and connections; service or replace as needed. P-1  
10 Practice recommended precautions when handling static sensitive devices.  P-2